Fireplace Firebox Burner Bio Ethanol Insert Biofuels (33 cm) Stainless Steel 2mm

Description

Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.
Postal Service as always works - Great!
Combustion chamber "Kolchuga" great"
The combustion chamber "Kolchuga" great" is intended for use as a separate unit or for bio fireplaces.
You are buying only a Stainless Steel Ethanol Fireplace Insert. Photo ”with a burning
flame
in the fireplace”
shows one possible application The combustion chamber "Kolchuga" great".
Especially:
• Divider fire - a special chamber design allows the
flame
to burn uniformly throughout its length.
• Cover allows to adjust the height of the
flame
.
• Material - Stainless steel 2,0 mm or 5,66 points  thick.
• Total - 1,2 liters.
• Maximum filling of fuel is recommended for no more than  - 900 ml.
• Biofuel consumption of 300 ml / hour - at the maximum level of
flame
.
• Environmentally Friendly
• As Safe as a Candle
• No Smell or Fumes
• Minimal Installation
No Venting, Gas or Electrical Lines needed
• Just install, fill with ethanol and light it up, and there you go a wonderful
flame
.
• Used:
Biofuels, bioethanol, ethanol.
Dimensions:
• Tank (Length x Height x Width): 28,5 cm x 4,7 cm x 8,5 cm or 11,2 inch х  1,85 inch х 3,35 inch
• The tank lid ((Length x Width): 33 cm x 11,5 cm or 13 inch x 4,53 inch
The device
for
ignition
of fire
A device for
ignition
and
flame control
in
Biofireplaces
.
Made of
stainless
steel
.
Length
22
cm
or 8
,67 inch
Application
:
1
.
Pour
into a container
for
bio-fuel
combustion
2
.
Lower the
tip of
the device
for the ignition
and
wet
in the
tank
for
combustion
3
.
Set fire to
the tip of
the device
for
combustion
4
.
Set fire to
the tip of
the device
for
burning
tank
with
biofuel
Information that tells you about me as a manufacturer of burners
This letter is from a buyer who bought Combustion chamber "Victory" Medium ", left to me positive feedback and just wrote me a letter. Thank you, I was very pleased.
Sent Date: 17-Aug-12 04:51:43 AEST
Dear allmechanicalparts,
Howdy! Thanks for the feedback. FYI, I did a burn test the other night in our fireplace with it. I only put in 1L of Denatured Alcohol into the reservoir to check how the denatured alcohol would burn in it (flame height and color) and for how long. I was very pleasantly surprised to get 2hrs. & 20 min. from it. This means a 1.3L fill as indicated by your directions of maximum fill will get right around a 3-hr. burn, that's a very efficient design you have, that is awesome! Love the unit very much. Feel free to pass on the info to your customers.
The green label one produces a nice golden flame, the blue label does not, the blue container only produces a blue flame which isn't as natural and attractive. Being that this product is at any local hardware store, these fireplaces will really start to take off! :)
Now I can build my tabletop fireplace now that I have the key element. Thanks much!
Gary
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.